CH445 | Wing Chair 休闲椅(Black steel, Leather Thor 301)
CH445 | WING CHAIR
Designed by Hans J. Wegner
The CH445 Wing Chair is a high-backed, upholstered armchair with a stainless steel frame.
Hans J. Wegner’s expertise for sculptured design and demand for quality craftsmanship is clearly expressed in this dramatic looking chair.
Armchair with a sculptured look and pleasant comfort
Hans J. Wegner’s CH445 chair, also known as the Wing Chair, is a fully upholstered easy chair that rests on a stainless steel frame. The armchair, with its distinctive lines and pleasant seating comfort, is a fine example of how a high-backed armchair should be according to Wegner.
Under the upholstery there is a solid beech frame which gives the chair strength and durability. The precise shape and density of the upholstery are carefully chosen so that the chair can best support all parts of the body. The seat and backrest are constructed to provide comfortable support for the back, shoulders, neck and head in different sitting positions. The slender, round stainless steel of the frame has front legs that tilt slightly forward while the rear legs protrude far backwards so that the chair, despite its reclining position, will not tip over. Four small steel cone shaped elements link the upper part of the chair with the frame. Each leg has a steel shoe attached to prevent the chair from sliding.
The Wing Chair was designed in 1960 when only a few examples were produced. Carl Hansen & Søn relaunched the chair in 2006.
The CH445 Wing Chair is available with the matching CH446 foot stool, for added comfort.
Product Information
Item Code ｜ 代码
No. ｜ 编码: CH445-Black steel, Leather Thor 301
EAN ｜ 条码:
Dimensions | 尺寸
W900mm × H1030mm × D900mm, SH390mm × SD900mm
Materials | 材料
Frame: stainless steel. 不锈钢框架。
Seat/Back: solid beech wood skeleton., and leather thor with foam. 座面/椅背由榉木原木骨架，和经过耐腐蚀处理的半苯胺天然皮革填充椅用泡沫制成。
Maintenance ｜ 养护
Should not be placed too close to heat sources.
不应放在靠近热源的地方。
Direct sunlight should not be allowed for long periods, especially strong sunlight.
不应长时间让阳光直射，尤其是强烈阳光。
For everyday cleaning, use a soft cloth(Do not use rough cloth to avoid damage to the surface) wrung out with clean hot water. If necessary, clean with low concentrated soap.
日常清洁，可使用软布（切勿使用粗糙布面，以免对表面造成损伤）在热水中浸湿后拧干来擦拭。如有必要，配以低浓度的皂液进行清洁。
For the seat, regularly vacuum your leather furniture with a soft brush and avoid using detergents and sharp implements. For everyday care and cleaning, we recommend using a clean soft cloth wrung out with lukewarm water.
定期用软毛刷清洁皮革家具，避免使用清洁剂和锋利的工具。对于日常护理和清洁，建议使用干净软布蘸取温水拧干后擦拭。
Keep stainless steel clean and dry. Stainless steel may be permanently stained if water/fat/cleaning products are not removed relatively quickly. Clean the surface with a lint-free cleaning cloth added warm water and a mild detergent.
平时要保持不锈钢清洁干燥。如果水滴/脂肪/清洁剂在产品上长时间保持，不锈钢可能会被永久性地弄脏。此时可用蘸有温水和中性清洁剂的无绒清洁布清洁其表面。
Warranty ｜ 质保
Five years（Standard use），5年（规范使用）
Hans J. Wegner
Designer
Among Danish furniture designers, Hans J. Wegner is considered one of the most creative, innovative and prolific. Often referred to as the master of the chair, Wegner created almost 500 chairs in his lifetime – many of them considered masterpieces. He is probably best known for his iconic Wishbone Chair which has been in continuous production since 1950.
The core of Wegner’s legacy is his focus on bringing the inner workings – the soul – of the furniture to the exterior, where the simplicity and functionality can be appreciated.
